Henan Rancheng Machinery Co., Ltd.
Henan Rancheng Machinery Co., Ltd.
Add to Cart
450m Drilling Depth 500mm Diameter Water Well Drilling Rig 129HP Diesel Engine
Machine Introduction
The RC450T truck - mounted deep well drilling rig is a rotary table - type deep well water drilling equipment, suitable for water wells, electric drilling and coring, geothermal wells, geological exploration, etc. It is based on the HOWO 6X6 or 6X4 special lifting chassis and is equipped with main drive, gearbox, dual hydraulic winches, mud pump, rotary table and tower. It adopts directional circulation drilling technology and is equipped with BW900 / 25 mud pump, which is suitable for soft soil, sand and rock. Power is transmitted from the engine to the PTO to drive the drilling rig. Optional diesel or electric engine, hydraulic pressurization device improves drilling efficiency. The drilling rig is easy to operate and has high reliability.
Technical Parameters
| The shape size | 11300×2500×4100mm | |
| The whole machine weight | 20T | |
| Drilling aperture | 500mm | |
| The drilling depth | 450m | |
| Kelly | 108×108×7500mm | |
| Hole drill pipe | φ89 | |
| Drill chassis parts | Chassis: HOWO 6×6 or 6×4 | |
| The mast section | MODEL: Truss type | |
| Load:40T | ||
| Height:11M Hook load:16T | ||
| Power part | WP6D132E:120KW | |
| Mud Pump | MODEL | BW900/25 |
| Maximum pressure | 3 MPa | |
| Maximum pump discharge | 900L/min | |
| Required power | 37 Horsepower | |
| Suction pipe diameter | Φ101.6 mm | |
| Diameter of the drain pipe | Φ76.2mm | |
| Rotary table gearbox | Output speed (r/min) Ⅰ Ⅱ Ⅲ IV V reversal 33 59 97 159 253 27 | |
| Main hoist | Single rope tension: 4T Drum diameter: φ280mm Wire rope diameter: Φ17.5mm Rope capacity: 80m | |
| Bailing | Single rope tension: 4T Drum diameter: φ280mm wire rope diameter: Φ17.5MM rope capacity: 80m | |
| Tool lifting | Single rope tension: 1T Rope capacity: 45m | |
| Control panel | The hydraulic auxiliary operation, the source of power for hydraulic pump, convenient and efficient | |
| Rotary table | Rotary table through-hole diameter (mm) Φ505 | |
| The rig can be installed 30KW generator | After the installation of the generator can be used for electric welding, lighting, and other useful life. | |
Machine Pictures
